A combination type unit board that allows you to choose the perfect size to suit your space.
Baseboard protection design
The rear part of the top plate extends approximately 15 mm from the main unit, so the top plate can be installed on the wall without any gaps, avoiding the baseboards.
Removable back panel design
The back panels of units other than the drawers can be easily removed from the front and back. Convenient for wiring equipment even after furniture has been installed.
Wiring design after shelf board
Space is provided behind the shelves to allow equipment cords to run up and down.
TV cable cutout design
A wiring space has been secured behind the top board for connecting equipment on the top board and equipment installed inside the board. The long top plate has a sliding structure that allows you to change the wiring position. You can also freely change the placement of the TV.
(Wiring position is fixed for top plate widths 404~1204)
A4 file storage
The inner dimensions of the low unit are designed to allow A4 size documents to be stored vertically. Convenient design that makes it easy to take out and store.
Vertical equipment/cord storage space
The 800mm wide main unit has space to store vertical devices such as game consoles, routers, and hard drives, as well as excess wiring cords and power strips. (With cord hidden board)
Asymmetrical vertical partition design
The vertical partitions of the 800mm wide main unit are positioned asymmetrically. The convenient design allows you to freely change the position of the left and right shelves depending on the size of the items being stored.
Drawer divider board
The 800mm wide drawer unit has asymmetrical partitions on the left and right sides. You can use them according to the size of the items you are storing.
TV fall prevention function (urea screw)
Equipped as standard with urea screws for attaching the fixing belt that comes with the TV behind the top plate of the TV board.
Fall prevention/leveling (adjuster function)
All units are equipped with an adjuster as standard. Effective for leveling the unit and adjusting for rattling. Additionally, by raising the front adjuster slightly and letting it lean against the wall, it will remain stable in the event of an earthquake.
L-shaped bracket for wall fixing
All tabletops come with L-shaped brackets for wall fixing. By fixing the unit directly to the wall, you can prevent it from falling over in the event of an
earthquake, so we recommend fixing it to the wall. By assembling the top plate last, you can neatly hide the L bracket.
Slit door (remote control transparent)
We have prepared a glass door with vertical slits. If you align the position of the remote control receiver of the AV equipment, the remote control can be transmitted through. We also paid attention to the sense of unity in design with the board door.
*It may not work depending on the location of the receiver on the device.
Push-open door
Adopts a push-open door that opens and closes by pushing. It has a simple design without handles or handles.
"Natural Mark" is a proof of nature. At Karimoku, we believe that each piece has its own unique character.